Optional LumenRadio wireless DMX is also available to provide control data to the fixture. DMX data connections may be hardwired with the provided IDC or screw terminal plugin connectors or the optional external flush mounted Neutrik 5 pin XLR 3 pin XLR or RJ-45 Ethercon connectors. Power connections may be hardwired internally with a ½” or ¾” conduit connections and the provided flip lever Wago connectors, or connected to an optional external flush Neutrik PowerCon connector. The annual quiescent power draw is less than 9 KWH. Standby wattage is less than 1 Watt with power on and DMX at level zero. This enables the fixtures to instantly respond to DMX control signals without waiting for relays to sequence and fixture boot time. The fixtures are fully rated for 24/7/365 operation. Relays are not required to turn The Light Source, Inc. The LED fixture responds quickly, producing full light output in 2-3 seconds after power is applied. Inrush current is limited, allowing up to 12 of the 100 Watt LED fixtures to run on a single pole 20 Amp 120VAC circuit breaker. The LED driver has active power factor correction with 99% PF at 120VAC, ATHD of 7%, and draws only. RL Series fixture’s all include the UL required thermal protector that is specific to the supply voltage. The 150 Watt LED driver may be factory preset to 80, 100, 120, or 150 Watts output. RL Series fixture’s LED driver has a universal input range of 100VAC to 277VAC 50/60HZ with no adjustments required, and a mean time between failures of 330,000 hours. The fixture is also listed for wet locations, covered ceilings for use outdoors. It is a great choice for atriums, auditoriums, churches, museums, schools, studios, theaters, and similar locations. The luminaire provides the look and feel of a natural, single source incandescent light, as well as excellent LED performance and longevity. THREE-YEAR LIMITED WARRANTY: The Recessed Grid-Ceiling LED panel light is backed by Allsmartlife 3-year warranty.The Light Source RL Series 2×2 6” Fresnel LED recessed fixture is perfect for applications requiring a drop-in 2’ by 2’ tile fixture with up to 12,750 lumens and excellent dimming, tight beam control, and a high quality of light. Get started to choose Allsmartlife LED panel with confidence. CERTIFICATION: The LED panel light is is qualified by "Design Lights Consortium (DLC)" and "Lighting Facts", also UL listed(with lable and serial No.),etc.Three alternative mounting options are available: suspended, surface and sheetrock flush mount(Required accessories). No accessories for T-Grid installation 3. ▶NOTE◀ 1.You can choose "Get expert installation" if you need a professional installation, OR you can install the panel light by following the INSTRUCTION MANUAL(included in the package) 2. INSTALLATION: This 2x2 LED panel light can be recessed in T-Grid ceiling in home, schools, hospitals and other public entities.DIMMABLE LED FLAT PANEL LIGHT: 0-10V dimming led panel light, For the NON-dimmable panel, connect the AC mains power to the LED driver For the Dimmable panel, connect the AC mains power to the 0-10V dimming cable.ENERGY SAVING: The 2x2FT LED Edge-Lit Flat Panel can replace 140W halogen bulb(140W Equivalent), saving you up to 82% in energy consumption.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |